Smoke alarm keeps chirping

Q: Smoke alarm keeps chirping

In Canada, a smoke alarm that chirps once every 30 to 60 seconds is almost always telling you its battery is low — replace the battery (even on hardwired units, which have a backup battery). If a fresh battery doesn't stop it, the alarm has likely reached its end of life: smoke alarms expire about 10 years after their manufacture date and must be replaced. A steady, loud alarm — not an intermittent chirp — together with any smoke, heat, or fire means get everyone out and call 911.

That single chirp every minute or so is annoying, but it's almost never smoke — it's the alarm asking for attention, usually a battery.

tuneQue remarquez-vous?

Sélectionnez ce qui correspond et la liste ci-dessous se réordonne. Pas certain? Passez.

emergency_home

flag

Commencez ici

In Canada, replace the battery first — a chirp every 30–60 seconds is the classic low-battery signal. Use the exact battery type printed on the alarm; on a hardwired unit, change the backup battery. This clears the chirp the vast majority of the time.

Classé selon des données de pannes réelles. L’ordre s’ajuste selon vos observations ci-dessus.

Causes probables, dans l’ordre à vérifier

Ordre typique affiché

Pour débutant Faisable, avec soin Sécurité critique Appelez un pro

handymanHow to fix it

Replace the battery with the exact type printed on the alarm (or the backup battery on a hardwired unit), reseat it fully, close the drawer, and press Test to confirm.

Twist the alarm off its mounting bracket and open the battery compartment.
Fit a fresh battery of the exact type marked on the alarm; on a hardwired unit this is the backup battery behind the cover.
Close the drawer until it clicks, remount the alarm, and hold the Test button until it sounds to confirm it's working.

schedule5 min savings$4–12

Smoke-alarm batteryMatch the exact type printed on your alarm (often 9V or the specified lithium cell)

gavel Vérifiez d’abord votre province AB: permis au propriétaire · BC: permis au propriétaire · ON: permis au propriétaire · PE: permis au propriétaire · QC: permis au propriétaire
Replacing an alarm battery is routine homeowner maintenance everywhere. Note: replacing a hardwired interconnected alarm involves house wiring, which varies by province.

visibilityHow to check

Take the alarm off its bracket (twist to release) and look on the back for a "manufactured" or "replace by" date.
If it's about 10 years past the manufacture date — or there's no date at all — it's at end of life and should be replaced, not repaired.
Replace it with a current alarm (consider a 10-year sealed-battery model), and replace other alarms of the same age at the same time.

buildAucun outil schedule5 min

sort

Pourquoi la liste est dans cet ordre

Nous ne classons pas seulement selon la probabilité. Nous classons comme le ferait un bon artisan honnête : éliminer d’abord les causes gratuites, sûres et courantes. C’est pourquoi les vérifications peu coûteuses passent avant les réparations chères — et pourquoi tout ce qui est dangereux reçoit un arrêt net plutôt qu’un encouragement. Cet ordre existe pour vous faire économiser, pas pour vous vendre quelque chose.