FirstCheck
EN FR
🍁 Conçu pour les foyers canadiens — rédigé selon le Code canadien de l’électricité et les règles provinciales. N’est pas destiné à un usage hors du Canada.
ÉBAUCHE — cette page n’a pas encore été révisée par un professionnel licencié. Aperçu éditorial seulement.

Lights are flickering

Flickering lights are usually a bulb or a dimmer, not a wiring disaster. One pattern matters more than the rest: if the whole house flickers at once, skip ahead — that one deserves a prompt call.

tuneQue remarquez-vous?
Sélectionnez ce qui correspond et la liste ci-dessous se réordonne. Pas certain? Passez.
emergency_home

flag
Commencez ici

In Canadian homes, start with the bulb. Switch the light off, let the bulb cool, snug it in its socket, and try again. Still flickering? Swap in a bulb you know works. If the fixture is on a dimmer and the bulb is an LED, check the package or bulb base for the word "dimmable" — a non-dimmable LED on a dimmer flickers by design.

Classé selon des données de pannes réelles. L’ordre s’ajuste selon vos observations ci-dessus.

Causes probables, dans l’ordre à vérifier

Ordre typique affiché
Pour débutant Faisable, avec soin Sécurité critique Appelez un pro

visibilityHow to check

  1. Switch the light off and let the bulb cool for a minute, then snug it gently in its socket — a quarter-turn is often the whole fix.
  2. Still flickering? Swap in a bulb you know works from another fixture. If the flicker stops, the old bulb was the cause.
  3. If the fixture is on a dimmer, check the bulb or its package for the word "dimmable". A non-dimmable LED on a dimmer will flicker or shimmer, especially at low settings — that's a mismatch, not a fault in your wiring.
buildAucun outil schedule5 min

handymanHow to fix it

Reseat or replace the bulb. If the fixture is on a dimmer, buy an LED marked "dimmable" — and if flicker persists at low settings, choose a bulb listed as compatible with your dimmer model (manufacturers publish compatibility lists).

  1. Switch off the light and let the bulb cool before handling it.
  2. Snug the bulb in its socket; if it's visibly darkened at the base or rattles, replace it.
  3. On dimmed fixtures, fit a dimmable LED. Match the base (usually E26 medium in Canada) and, for stubborn shimmer, pick a bulb from the dimmer maker's published compatibility list.
schedule10 min savings$5–25
Dimmable LED bulbMatch the base (usually E26 in Canada) and look for "dimmable" on the package; for stubborn shimmer, use the dimmer maker's compatibility list

visibilityHow to rule it in (without opening anything)

  1. Put a known-good bulb in the flickering fixture. If the flicker continues with a good bulb, the bulb is ruled out.
  2. Notice the pattern: does the flicker respond to footsteps, a door closing, or jiggling the switch? Vibration-sensitive flicker points to a loose connection.
  3. Check whether other lights on the same circuit flicker too. One fixture or one circuit — with good bulbs — points to a loose joint at that fixture or its switch. Stop there: that's your free rule-in, and the repair belongs to a licensed electrician.
buildAucun outil schedule10 min

verifiedPourquoi confier ceci à un pro

Finding a loose connection means opening boxes and handling conductors that may be live or mis-wired, and a joint remade badly keeps making heat inside your wall. This is exactly the kind of small, quick job electricians do every week — the visit is short and the peace of mind is real.

Vos notes accompagnent la demande — ce que vous avez vu, ce que vous avez éliminé, quand ça a commencé — pour que le pro arrive avec une longueur d’avance.

visibilityHow to recognize it

  1. Next time the lights dip, note what else just happened. Furnace blower, AC compressor, dryer, or a space heater starting at the same moment is the signature.
  2. Judge the dip honestly: a brief, slight dim that recovers in under a second is normal in most Canadian homes — big motors gulp current at start-up.
  3. It stops being normal if the dips are new, noticeably deep, happen with small loads, or are getting worse over time. Those patterns are worth an electrician's look — they can point to an undersized circuit or a loosening connection upstream.
buildAucun outil schedule5 min

handymanWhen it's normal — and when it isn't

A brief, slight dim when a big motor starts usually needs no fix at all. If dips are deep, new, or worsening, an electrician can check for loose connections and measure the voltage drop; a persistent culprit appliance (like an AC) can sometimes get a dedicated circuit or a hard-start kit. Honest answer: many homes simply live with a small blink.

visibilityHow to check

  1. Run the dimmer through its range. Flicker that appears at certain brightness levels — especially low ones — points to the dimmer (or an LED–dimmer mismatch; rule the bulb out first).
  2. Listen and feel: a buzz from the switch, or a switch plate that feels warm to the touch, points to a dimmer working too hard or wearing out. Warm is a clue; hot, or any burning smell, means switch it off and call an electrician.
  3. Try a dimmable LED you know is compatible. If a good, compatible bulb still flickers through that switch, the dimmer is the prime suspect.
buildAucun outil schedule5 min

handymanReplacing the dimmer

report Two rules before you open the switch boxFirst: breaker off and proven dead with a non-contact voltage tester — switch boxes can contain wires from more than one circuit, so test every wire. Second: check your province's rules; in Quebec this work is reserved to licensed electricians, and other provinces may require a permit. If either rule gives you pause, this is a quick, inexpensive job for an electrician.

Turn off the breaker, verify the box is dead with a non-contact voltage tester, photograph the wiring, and swap in an LED-compatible dimmer wire-for-wire. Check your province's rules first — in some provinces this is licensed or permit work (see the legality notes on this page).

  1. Turn off the circuit at the breaker panel — not just the switch — and put tape over the breaker so nobody flips it back.
  2. Remove the switch plate and confirm the box is dead with a non-contact voltage tester on every wire. No tester, no job.
  3. Photograph the wiring, then disconnect the old dimmer and connect the new LED-compatible dimmer wire-for-wire per its instructions.
  4. Fold the wires back neatly, mount, restore power, and run the dimmer through its full range with your bulbs installed.
schedule30 min savings$15–60
LED-compatible dimmer switchMatch single-pole vs 3-way to your old dimmer, and check it's rated for LED loads
gavel Vérifiez d’abord votre province AB: permis et inspection requis · BC: permis et inspection requis · ON: permis et inspection requis · PE: permis et inspection requis · QC: réservé aux licenciés
National default shown conservatively as licensed-only; electrical rules are provincial — REVIEW: replace with verified per-province rows before publish.

verifiedPourquoi confier ceci à un pro

A loose service neutral puts abnormal voltage on circuits all over the house and can overheat connections until they burn. Everything past noticing the pattern belongs to your utility or a licensed electrician — the service entrance can remain live even with your main breaker off. Your whole job is the phone call, made today.

Vos notes accompagnent la demande — ce que vous avez vu, ce que vous avez éliminé, quand ça a commencé — pour que le pro arrive avec une longueur d’avance.

sort

Pourquoi la liste est dans cet ordre

Nous ne classons pas seulement selon la probabilité. Nous classons comme le ferait un bon artisan honnête : éliminer d’abord les causes gratuites, sûres et courantes. C’est pourquoi les vérifications peu coûteuses passent avant les réparations chères — et pourquoi tout ce qui est dangereux reçoit un arrêt net plutôt qu’un encouragement. Cet ordre existe pour vous faire économiser, pas pour vous vendre quelque chose.